Item type:Bluetooth Gamepad
1. Through Bluetooth, the handle connects to the host for switch. Connecting to PC host through USB cable in shutdown state, realizes the function of X_input and D_input mode.
2. Handle operation: For the first time, press the HOME key for 3 seconds to boot up and enter the pairing. The LED 1-4 flash indicates that the pairing is successful. The corresponding channel lamp allocated by the Switch host is long bright.
3. Connect again and press the HOME key to boot and enter the link back. The LED 1-4 flashes slowly, indicating the success of matching. The corresponding channel lamp allocated by the host is long bright.
4. Key Composition.
5. Motor function: Handle with dual motor function.
6. Charging: When the handle is turned off, when the handle is inserted into the adapter, the LED 1-4 flickers, and when it is full charged, the LED 1-4 goes out. When the handle is on-line, when the handle is inserted into the USB, the corresponding channel lamp flashes slowly, after fully charged and long bright.
7. Low power alarm: When the battery voltage of the handle is less than 3.6V (according to the principle of battery characteristics), the corresponding channel lamp flashes slowly, indicating that the handle is low-power and needs charging.
8. Shutdown: When the handle is on, press the HOME key for 5 seconds and the handle enters the shutdown. When the handle is on-line, it shuts down automatically without any key operation in 10 minutes.
9. Upgrading: The handle can be upgraded directly without driving USB.
10. Receiving distance: The acceptance distance of the handle can reach 8-10m, depending on the environment.
Battery capacity: 500 mAh
Charging time: 2.5 hours
1/2 x Bluetooth Gamepad
1 x Charging Cable
1 x Replaceable Cross Key
1 x User Manual
Product type: Gamepads